mio/poll.rs
1#[cfg(all(
2 unix,
3 not(mio_unsupported_force_poll_poll),
4 not(any(
5 target_os = "aix",
6 target_os = "espidf",
7 target_os = "fuchsia",
8 target_os = "haiku",
9 target_os = "hermit",
10 target_os = "hurd",
11 target_os = "nto",
12 target_os = "solaris",
13 target_os = "vita"
14 )),
15))]
16use std::os::fd::{AsRawFd, RawFd};
17#[cfg(all(debug_assertions, not(target_os = "wasi")))]
18use std::sync::atomic::{AtomicBool, Ordering};
19#[cfg(all(debug_assertions, not(target_os = "wasi")))]
20use std::sync::Arc;
21use std::time::Duration;
22use std::{fmt, io};
23
24use crate::{event, sys, Events, Interest, Token};
25
26/// Polls for readiness events on all registered values.
27///
28/// `Poll` allows a program to monitor a large number of [`event::Source`]s,
29/// waiting until one or more become "ready" for some class of operations; e.g.
30/// reading and writing. An event source is considered ready if it is possible
31/// to immediately perform a corresponding operation; e.g. [`read`] or
32/// [`write`].
33///
34/// To use `Poll`, an `event::Source` must first be registered with the `Poll`
35/// instance using the [`register`] method on its associated `Register`,
36/// supplying readiness interest. The readiness interest tells `Poll` which
37/// specific operations on the handle to monitor for readiness. A `Token` is
38/// also passed to the [`register`] function. When `Poll` returns a readiness
39/// event, it will include this token. This associates the event with the
40/// event source that generated the event.
41///
42/// [`event::Source`]: ./event/trait.Source.html
43/// [`read`]: ./net/struct.TcpStream.html#method.read
44/// [`write`]: ./net/struct.TcpStream.html#method.write
45/// [`register`]: struct.Registry.html#method.register
46///
47/// # Examples
48///
49/// A basic example -- establishing a `TcpStream` connection.
50///
51#[cfg_attr(all(feature = "os-poll", feature = "net"), doc = "```")]
52#[cfg_attr(not(all(feature = "os-poll", feature = "net")), doc = "```ignore")]
53/// # use std::error::Error;
54/// # fn main() -> Result<(), Box<dyn Error>> {
55/// use mio::{Events, Poll, Interest, Token};
56/// use mio::net::TcpStream;
57///
58/// use std::net::{self, SocketAddr};
59///
60/// // Bind a server socket to connect to.
61/// let addr: SocketAddr = "127.0.0.1:0".parse()?;
62/// let server = net::TcpListener::bind(addr)?;
63///
64/// // Construct a new `Poll` handle as well as the `Events` we'll store into
65/// let mut poll = Poll::new()?;
66/// let mut events = Events::with_capacity(1024);
67///
68/// // Connect the stream
69/// let mut stream = TcpStream::connect(server.local_addr()?)?;
70///
71/// // Register the stream with `Poll`
72/// poll.registry().register(&mut stream, Token(0), Interest::READABLE | Interest::WRITABLE)?;
73///
74/// // Wait for the socket to become ready. This has to happens in a loop to
75/// // handle spurious wakeups.
76/// loop {
77/// poll.poll(&mut events, None)?;
78///
79/// for event in &events {
80/// if event.token() == Token(0) && event.is_writable() {
81/// // The socket connected (probably, it could still be a spurious
82/// // wakeup)
83/// return Ok(());
84/// }
85/// }
86/// }
87/// # }
88/// ```
89///
90/// # Portability
91///
92/// Using `Poll` provides a portable interface across supported platforms as
93/// long as the caller takes the following into consideration:
94///
95/// ### Spurious events
96///
97/// [`Poll::poll`] may return readiness events even if the associated
98/// event source is not actually ready. Given the same code, this may
99/// happen more on some platforms than others. It is important to never assume
100/// that, just because a readiness event was received, that the associated
101/// operation will succeed as well.
102///
103/// If operation fails with [`WouldBlock`], then the caller should not treat
104/// this as an error, but instead should wait until another readiness event is
105/// received.
106///
107/// ### Draining readiness
108///
109/// Once a readiness event is received, the corresponding operation must be
110/// performed repeatedly until it returns [`WouldBlock`]. Unless this is done,
111/// there is no guarantee that another readiness event will be delivered, even
112/// if further data is received for the event source.
113///
114/// [`WouldBlock`]: std::io::ErrorKind::WouldBlock
115///
116/// ### Readiness operations
117///
118/// The only readiness operations that are guaranteed to be present on all
119/// supported platforms are [`readable`] and [`writable`]. All other readiness
120/// operations may have false negatives and as such should be considered
121/// **hints**. This means that if a socket is registered with [`readable`]
122/// interest and either an error or close is received, a readiness event will
123/// be generated for the socket, but it **may** only include `readable`
124/// readiness. Also note that, given the potential for spurious events,
125/// receiving a readiness event with `read_closed`, `write_closed`, or `error`
126/// doesn't actually mean that a `read` on the socket will return a result
127/// matching the readiness event.
128///
129/// In other words, portable programs that explicitly check for [`read_closed`],
130/// [`write_closed`], or [`error`] readiness should be doing so as an
131/// **optimization** and always be able to handle an error or close situation
132/// when performing the actual read operation.
133///
134/// [`readable`]: ./event/struct.Event.html#method.is_readable
135/// [`writable`]: ./event/struct.Event.html#method.is_writable
136/// [`error`]: ./event/struct.Event.html#method.is_error
137/// [`read_closed`]: ./event/struct.Event.html#method.is_read_closed
138/// [`write_closed`]: ./event/struct.Event.html#method.is_write_closed
139///
140/// ### Registering handles
141///
142/// Unless otherwise noted, it should be assumed that types implementing
143/// [`event::Source`] will never become ready unless they are registered with
144/// `Poll`.
145///
146/// For example:
147///
148#[cfg_attr(all(feature = "os-poll", feature = "net"), doc = "```")]
149#[cfg_attr(not(all(feature = "os-poll", feature = "net")), doc = "```ignore")]
150/// # use std::error::Error;
151/// # use std::net;
152/// # fn main() -> Result<(), Box<dyn Error>> {
153/// use mio::{Poll, Interest, Token};
154/// use mio::net::TcpStream;
155/// use std::net::SocketAddr;
156/// use std::time::Duration;
157/// use std::thread;
158///
159/// let address: SocketAddr = "127.0.0.1:0".parse()?;
160/// let listener = net::TcpListener::bind(address)?;
161/// let mut sock = TcpStream::connect(listener.local_addr()?)?;
162///
163/// thread::sleep(Duration::from_secs(1));
164///
165/// let poll = Poll::new()?;
166///
167/// // The connect is not guaranteed to have started until it is registered at
168/// // this point
169/// poll.registry().register(&mut sock, Token(0), Interest::READABLE | Interest::WRITABLE)?;
170/// # Ok(())
171/// # }
172/// ```
173///
174/// ### Dropping `Poll`
175///
176/// When the `Poll` instance is dropped it may cancel in-flight operations for
177/// the registered [event sources], meaning that no further events for them may
178/// be received. It also means operations on the registered event sources may no
179/// longer work. It is up to the user to keep the `Poll` instance alive while
180/// registered event sources are being used.
181///
182/// [event sources]: ./event/trait.Source.html
183///
184/// ### Accessing raw fd/socket/handle
185///
186/// Mio makes it possible for many types to be converted into a raw file
187/// descriptor (fd, Unix), socket (Windows) or handle (Windows). This makes it
188/// possible to support more operations on the type than Mio supports, for
189/// example it makes [mio-aio] possible. However accessing the raw fd is not
190/// without it's pitfalls.
191///
192/// Specifically performing I/O operations outside of Mio on these types (via
193/// the raw fd) has unspecified behaviour. It could cause no more events to be
194/// generated for the type even though it returned `WouldBlock` (in an operation
195/// directly accessing the fd). The behaviour is OS specific and Mio can only
196/// guarantee cross-platform behaviour if it can control the I/O.
197///
198/// [mio-aio]: https://github.com/asomers/mio-aio
199///
200/// *The following is **not** guaranteed, just a description of the current
201/// situation!* Mio is allowed to change the following without it being considered
202/// a breaking change, don't depend on this, it's just here to inform the user.
203/// Currently the kqueue and epoll implementation support direct I/O operations
204/// on the fd without Mio's knowledge. Windows however needs **all** I/O
205/// operations to go through Mio otherwise it is not able to update it's
206/// internal state properly and won't generate events.
207///
208/// ### Polling without registering event sources
209///
210///
211/// *The following is **not** guaranteed, just a description of the current
212/// situation!* Mio is allowed to change the following without it being
213/// considered a breaking change, don't depend on this, it's just here to inform
214/// the user. On platforms that use epoll, kqueue or IOCP (see implementation
215/// notes below) polling without previously registering [event sources] will
216/// result in sleeping forever, only a process signal will be able to wake up
217/// the thread.
218///
219/// On WASM/WASI this is different as it doesn't support process signals,
220/// furthermore the WASI specification doesn't specify a behaviour in this
221/// situation, thus it's up to the implementation what to do here. As an
222/// example, the wasmtime runtime will return `EINVAL` in this situation, but
223/// different runtimes may return different results. If you have further
224/// insights or thoughts about this situation (and/or how Mio should handle it)
225/// please add you comment to [pull request#1580].
226///
227/// [event sources]: crate::event::Source
228/// [pull request#1580]: https://github.com/tokio-rs/mio/pull/1580
229///
230/// # Implementation notes
231///
232/// `Poll` is backed by the selector provided by the operating system.
233///
234/// | OS | Selector |
235/// |---------------|-----------|
236/// | Android | [epoll] |
237/// | DragonFly BSD | [kqueue] |
238/// | FreeBSD | [kqueue] |
239/// | iOS | [kqueue] |
240/// | illumos | [epoll] |
241/// | Linux | [epoll] |
242/// | NetBSD | [kqueue] |
243/// | OpenBSD | [kqueue] |
244/// | Windows | [IOCP] |
245/// | macOS | [kqueue] |
246///
247/// On all supported platforms, socket operations are handled by using the
248/// system selector. Platform specific extensions (e.g. [`SourceFd`]) allow
249/// accessing other features provided by individual system selectors. For
250/// example, Linux's [`signalfd`] feature can be used by registering the FD with
251/// `Poll` via [`SourceFd`].
252///
253/// On all platforms except windows, a call to [`Poll::poll`] is mostly just a
254/// direct call to the system selector. However, [IOCP] uses a completion model
255/// instead of a readiness model. In this case, `Poll` must adapt the completion
256/// model Mio's API. While non-trivial, the bridge layer is still quite
257/// efficient. The most expensive part being calls to `read` and `write` require
258/// data to be copied into an intermediate buffer before it is passed to the
259/// kernel.
260///
261/// [epoll]: https://man7.org/linux/man-pages/man7/epoll.7.html
262/// [kqueue]: https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2
263/// [IOCP]: https://docs.microsoft.com/en-us/windows/win32/fileio/i-o-completion-ports
264/// [`signalfd`]: https://man7.org/linux/man-pages/man2/signalfd.2.html
265/// [`SourceFd`]: unix/struct.SourceFd.html
266/// [`Poll::poll`]: struct.Poll.html#method.poll
267pub struct Poll {
268 registry: Registry,
269}
270
271/// Registers I/O resources.
272pub struct Registry {
273 selector: sys::Selector,
274 /// Whether this selector currently has an associated waker.
275 #[cfg(all(debug_assertions, not(target_os = "wasi")))]
276 has_waker: Arc<AtomicBool>,
277}
278
279impl Poll {
280 cfg_os_poll! {
281 /// Return a new `Poll` handle.
282 ///
283 /// This function will make a syscall to the operating system to create
284 /// the system selector. If this syscall fails, `Poll::new` will return
285 /// with the error.
286 ///
287 /// close-on-exec flag is set on the file descriptors used by the selector to prevent
288 /// leaking it to executed processes. However, on some systems such as
289 /// old Linux systems that don't support `epoll_create1` syscall it is done
290 /// non-atomically, so a separate thread executing in parallel to this
291 /// function may accidentally leak the file descriptor if it executes a
292 /// new process before this function returns.
293 ///
294 /// See [struct] level docs for more details.
295 ///
296 /// [struct]: struct.Poll.html
297 ///
298 /// # Examples
299 ///
300 /// ```
301 /// # use std::error::Error;
302 /// # fn main() -> Result<(), Box<dyn Error>> {
303 /// use mio::{Poll, Events};
304 /// use std::time::Duration;
305 ///
306 /// let mut poll = match Poll::new() {
307 /// Ok(poll) => poll,
308 /// Err(e) => panic!("failed to create Poll instance; err={:?}", e),
309 /// };
310 ///
311 /// // Create a structure to receive polled events
312 /// let mut events = Events::with_capacity(1024);
313 ///
314 /// // Wait for events, but none will be received because no
315 /// // `event::Source`s have been registered with this `Poll` instance.
316 /// poll.poll(&mut events, Some(Duration::from_millis(500)))?;
317 /// assert!(events.is_empty());
318 /// # Ok(())
319 /// # }
320 /// ```
321 pub fn new() -> io::Result<Poll> {
322 sys::Selector::new().map(|selector| Poll {
323 registry: Registry {
324 selector,
325 #[cfg(all(debug_assertions, not(target_os = "wasi")))]
326 has_waker: Arc::new(AtomicBool::new(false)),
327 },
328 })
329 }
330 }
331
332 /// Create a separate `Registry` which can be used to register
333 /// `event::Source`s.
334 pub fn registry(&self) -> &Registry {
335 &self.registry
336 }
337
338 /// Wait for readiness events
339 ///
340 /// Blocks the current thread and waits for readiness events for any of the
341 /// [`event::Source`]s that have been registered with this `Poll` instance.
342 /// The function will block until either at least one readiness event has
343 /// been received or `timeout` has elapsed. A `timeout` of `None` means that
344 /// `poll` will block until a readiness event has been received.
345 ///
346 /// The supplied `events` will be cleared and newly received readiness events
347 /// will be pushed onto the end. At most `events.capacity()` events will be
348 /// returned. If there are further pending readiness events, they will be
349 /// returned on the next call to `poll`.
350 ///
351 /// A single call to `poll` may result in multiple readiness events being
352 /// returned for a single event source. For example, if a TCP socket becomes
353 /// both readable and writable, it may be possible for a single readiness
354 /// event to be returned with both [`readable`] and [`writable`] readiness
355 /// **OR** two separate events may be returned, one with [`readable`] set
356 /// and one with [`writable`] set.
357 ///
358 /// Note that the `timeout` will be rounded up to the system clock
359 /// granularity (usually 1ms), and kernel scheduling delays mean that
360 /// the blocking interval may be overrun by a small amount.
361 ///
362 /// See the [struct] level documentation for a higher level discussion of
363 /// polling.
364 ///
365 /// [`event::Source`]: ./event/trait.Source.html
366 /// [`readable`]: struct.Interest.html#associatedconstant.READABLE
367 /// [`writable`]: struct.Interest.html#associatedconstant.WRITABLE
368 /// [struct]: struct.Poll.html
369 /// [`iter`]: ./event/struct.Events.html#method.iter
370 ///
371 /// # Notes
372 ///
373 /// This returns any errors without attempting to retry, previous versions
374 /// of Mio would automatically retry the poll call if it was interrupted
375 /// (if `EINTR` was returned).
376 ///
377 /// Currently if the `timeout` elapses without any readiness events
378 /// triggering this will return `Ok(())`. However we're not guaranteeing
379 /// this behaviour as this depends on the OS.
380 ///
381 /// # Examples
382 ///
383 /// A basic example -- establishing a `TcpStream` connection.
384 ///
385 #[cfg_attr(all(feature = "os-poll", feature = "net"), doc = "```")]
386 #[cfg_attr(not(all(feature = "os-poll", feature = "net")), doc = "```ignore")]
387 /// # use std::error::Error;
388 /// # fn main() -> Result<(), Box<dyn Error>> {
389 /// use mio::{Events, Poll, Interest, Token};
390 /// use mio::net::TcpStream;
391 ///
392 /// use std::net::{TcpListener, SocketAddr};
393 /// use std::thread;
394 ///
395 /// // Bind a server socket to connect to.
396 /// let addr: SocketAddr = "127.0.0.1:0".parse()?;
397 /// let server = TcpListener::bind(addr)?;
398 /// let addr = server.local_addr()?.clone();
399 ///
400 /// // Spawn a thread to accept the socket
401 /// thread::spawn(move || {
402 /// let _ = server.accept();
403 /// });
404 ///
405 /// // Construct a new `Poll` handle as well as the `Events` we'll store into
406 /// let mut poll = Poll::new()?;
407 /// let mut events = Events::with_capacity(1024);
408 ///
409 /// // Connect the stream
410 /// let mut stream = TcpStream::connect(addr)?;
411 ///
412 /// // Register the stream with `Poll`
413 /// poll.registry().register(
414 /// &mut stream,
415 /// Token(0),
416 /// Interest::READABLE | Interest::WRITABLE)?;
417 ///
418 /// // Wait for the socket to become ready. This has to happens in a loop to
419 /// // handle spurious wakeups.
420 /// loop {
421 /// poll.poll(&mut events, None)?;
422 ///
423 /// for event in &events {
424 /// if event.token() == Token(0) && event.is_writable() {
425 /// // The socket connected (probably, it could still be a spurious
426 /// // wakeup)
427 /// return Ok(());
428 /// }
429 /// }
430 /// }
431 /// # }
432 /// ```
433 ///
434 /// [struct]: #
435 pub fn poll(&mut self, events: &mut Events, timeout: Option<Duration>) -> io::Result<()> {
436 self.registry.selector.select(events.sys(), timeout)
437 }
438}
439
440#[cfg(all(
441 unix,
442 not(mio_unsupported_force_poll_poll),
443 not(any(
444 target_os = "aix",
445 target_os = "espidf",
446 target_os = "fuchsia",
447 target_os = "haiku",
448 target_os = "hermit",
449 target_os = "hurd",
450 target_os = "nto",
451 target_os = "solaris",
452 target_os = "vita"
453 )),
454))]
455impl AsRawFd for Poll {
456 fn as_raw_fd(&self) -> RawFd {
457 self.registry.as_raw_fd()
458 }
459}
460
461impl fmt::Debug for Poll {
462 fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
463 fmt.debug_struct("Poll").finish()
464 }
465}
466
467impl Registry {
468 /// Register an [`event::Source`] with the `Poll` instance.
469 ///
470 /// Once registered, the `Poll` instance will monitor the event source for
471 /// readiness state changes. When it notices a state change, it will return
472 /// a readiness event for the handle the next time [`poll`] is called.
473 ///
474 /// See [`Poll`] docs for a high level overview.
475 ///
476 /// # Arguments
477 ///
478 /// `source: &mut S: event::Source`: This is the source of events that the
479 /// `Poll` instance should monitor for readiness state changes.
480 ///
481 /// `token: Token`: The caller picks a token to associate with the socket.
482 /// When [`poll`] returns an event for the handle, this token is included.
483 /// This allows the caller to map the event to its source. The token
484 /// associated with the `event::Source` can be changed at any time by
485 /// calling [`reregister`].
486 ///
487 /// See documentation on [`Token`] for an example showing how to pick
488 /// [`Token`] values.
489 ///
490 /// `interest: Interest`: Specifies which operations `Poll` should monitor
491 /// for readiness. `Poll` will only return readiness events for operations
492 /// specified by this argument.
493 ///
494 /// If a socket is registered with readable interest and the socket becomes
495 /// writable, no event will be returned from [`poll`].
496 ///
497 /// The readiness interest for an `event::Source` can be changed at any time
498 /// by calling [`reregister`].
499 ///
500 /// # Notes
501 ///
502 /// Callers must ensure that if a source being registered with a `Poll`
503 /// instance was previously registered with that `Poll` instance, then a
504 /// call to [`deregister`] has already occurred. Consecutive calls to
505 /// `register` is unspecified behavior.
506 ///
507 /// Unless otherwise specified, the caller should assume that once an event
508 /// source is registered with a `Poll` instance, it is bound to that `Poll`
509 /// instance for the lifetime of the event source. This remains true even
510 /// if the event source is deregistered from the poll instance using
511 /// [`deregister`].
512 ///
513 /// [`event::Source`]: ./event/trait.Source.html
514 /// [`poll`]: struct.Poll.html#method.poll
515 /// [`reregister`]: struct.Registry.html#method.reregister
516 /// [`deregister`]: struct.Registry.html#method.deregister
517 /// [`Token`]: struct.Token.html
518 ///
519 /// # Examples
520 ///
521 #[cfg_attr(all(feature = "os-poll", feature = "net"), doc = "```")]
522 #[cfg_attr(not(all(feature = "os-poll", feature = "net")), doc = "```ignore")]
523 /// # use std::error::Error;
524 /// # use std::net;
525 /// # fn main() -> Result<(), Box<dyn Error>> {
526 /// use mio::{Events, Poll, Interest, Token};
527 /// use mio::net::TcpStream;
528 /// use std::net::SocketAddr;
529 /// use std::time::{Duration, Instant};
530 ///
531 /// let mut poll = Poll::new()?;
532 ///
533 /// let address: SocketAddr = "127.0.0.1:0".parse()?;
534 /// let listener = net::TcpListener::bind(address)?;
535 /// let mut socket = TcpStream::connect(listener.local_addr()?)?;
536 ///
537 /// // Register the socket with `poll`
538 /// poll.registry().register(
539 /// &mut socket,
540 /// Token(0),
541 /// Interest::READABLE | Interest::WRITABLE)?;
542 ///
543 /// let mut events = Events::with_capacity(1024);
544 /// let start = Instant::now();
545 /// let timeout = Duration::from_millis(500);
546 ///
547 /// loop {
548 /// let elapsed = start.elapsed();
549 ///
550 /// if elapsed >= timeout {
551 /// // Connection timed out
552 /// return Ok(());
553 /// }
554 ///
555 /// let remaining = timeout - elapsed;
556 /// poll.poll(&mut events, Some(remaining))?;
557 ///
558 /// for event in &events {
559 /// if event.token() == Token(0) {
560 /// // Something (probably) happened on the socket.
561 /// return Ok(());
562 /// }
563 /// }
564 /// }
565 /// # }
566 /// ```
567 pub fn register<S>(&self, source: &mut S, token: Token, interests: Interest) -> io::Result<()>
568 where
569 S: event::Source + ?Sized,
570 {
571 trace!(
572 "registering event source with poller: token={:?}, interests={:?}",
573 token,
574 interests
575 );
576 source.register(self, token, interests)
577 }
578
579 /// Re-register an [`event::Source`] with the `Poll` instance.
580 ///
581 /// Re-registering an event source allows changing the details of the
582 /// registration. Specifically, it allows updating the associated `token`
583 /// and `interests` specified in previous `register` and `reregister` calls.
584 ///
585 /// The `reregister` arguments fully override the previous values. In other
586 /// words, if a socket is registered with [`readable`] interest and the call
587 /// to `reregister` specifies [`writable`], then read interest is no longer
588 /// requested for the handle.
589 ///
590 /// The event source must have previously been registered with this instance
591 /// of `Poll`, otherwise the behavior is unspecified.
592 ///
593 /// See the [`register`] documentation for details about the function
594 /// arguments and see the [`struct`] docs for a high level overview of
595 /// polling.
596 ///
597 /// # Examples
598 ///
599 #[cfg_attr(all(feature = "os-poll", feature = "net"), doc = "```")]
600 #[cfg_attr(not(all(feature = "os-poll", feature = "net")), doc = "```ignore")]
601 /// # use std::error::Error;
602 /// # use std::net;
603 /// # fn main() -> Result<(), Box<dyn Error>> {
604 /// use mio::{Poll, Interest, Token};
605 /// use mio::net::TcpStream;
606 /// use std::net::SocketAddr;
607 ///
608 /// let poll = Poll::new()?;
609 ///
610 /// let address: SocketAddr = "127.0.0.1:0".parse()?;
611 /// let listener = net::TcpListener::bind(address)?;
612 /// let mut socket = TcpStream::connect(listener.local_addr()?)?;
613 ///
614 /// // Register the socket with `poll`, requesting readable
615 /// poll.registry().register(
616 /// &mut socket,
617 /// Token(0),
618 /// Interest::READABLE)?;
619 ///
620 /// // Reregister the socket specifying write interest instead. Even though
621 /// // the token is the same it must be specified.
622 /// poll.registry().reregister(
623 /// &mut socket,
624 /// Token(0),
625 /// Interest::WRITABLE)?;
626 /// # Ok(())
627 /// # }
628 /// ```
629 ///
630 /// [`event::Source`]: ./event/trait.Source.html
631 /// [`struct`]: struct.Poll.html
632 /// [`register`]: struct.Registry.html#method.register
633 /// [`readable`]: ./event/struct.Event.html#is_readable
634 /// [`writable`]: ./event/struct.Event.html#is_writable
635 pub fn reregister<S>(&self, source: &mut S, token: Token, interests: Interest) -> io::Result<()>
636 where
637 S: event::Source + ?Sized,
638 {
639 trace!(
640 "reregistering event source with poller: token={:?}, interests={:?}",
641 token,
642 interests
643 );
644 source.reregister(self, token, interests)
645 }
646
647 /// Deregister an [`event::Source`] with the `Poll` instance.
648 ///
649 /// When an event source is deregistered, the `Poll` instance will no longer
650 /// monitor it for readiness state changes. Deregistering clears up any
651 /// internal resources needed to track the handle. After an explicit call
652 /// to this method completes, it is guaranteed that the token previously
653 /// registered to this handle will not be returned by a future poll, so long
654 /// as a happens-before relationship is established between this call and
655 /// the poll.
656 ///
657 /// The event source must have previously been registered with this instance
658 /// of `Poll`, otherwise the behavior is unspecified.
659 ///
660 /// A handle can be passed back to `register` after it has been
661 /// deregistered; however, it must be passed back to the **same** `Poll`
662 /// instance, otherwise the behavior is unspecified.
663 ///
664 /// # Examples
665 ///
666 #[cfg_attr(all(feature = "os-poll", feature = "net"), doc = "```")]
667 #[cfg_attr(not(all(feature = "os-poll", feature = "net")), doc = "```ignore")]
668 /// # use std::error::Error;
669 /// # use std::net;
670 /// # fn main() -> Result<(), Box<dyn Error>> {
671 /// use mio::{Events, Poll, Interest, Token};
672 /// use mio::net::TcpStream;
673 /// use std::net::SocketAddr;
674 /// use std::time::Duration;
675 ///
676 /// let mut poll = Poll::new()?;
677 ///
678 /// let address: SocketAddr = "127.0.0.1:0".parse()?;
679 /// let listener = net::TcpListener::bind(address)?;
680 /// let mut socket = TcpStream::connect(listener.local_addr()?)?;
681 ///
682 /// // Register the socket with `poll`
683 /// poll.registry().register(
684 /// &mut socket,
685 /// Token(0),
686 /// Interest::READABLE)?;
687 ///
688 /// poll.registry().deregister(&mut socket)?;
689 ///
690 /// let mut events = Events::with_capacity(1024);
691 ///
692 /// // Set a timeout because this poll should never receive any events.
693 /// poll.poll(&mut events, Some(Duration::from_secs(1)))?;
694 /// assert!(events.is_empty());
695 /// # Ok(())
696 /// # }
697 /// ```
698 pub fn deregister<S>(&self, source: &mut S) -> io::Result<()>
699 where
700 S: event::Source + ?Sized,
701 {
702 trace!("deregistering event source from poller");
703 source.deregister(self)
704 }
705
706 /// Creates a new independently owned `Registry`.
707 ///
708 /// Event sources registered with this `Registry` will be registered with
709 /// the original `Registry` and `Poll` instance.
710 pub fn try_clone(&self) -> io::Result<Registry> {
711 self.selector.try_clone().map(|selector| Registry {
712 selector,
713 #[cfg(all(debug_assertions, not(target_os = "wasi")))]
714 has_waker: Arc::clone(&self.has_waker),
715 })
716 }
717
718 /// Internal check to ensure only a single `Waker` is active per [`Poll`]
719 /// instance.
720 #[cfg(all(debug_assertions, not(target_os = "wasi")))]
721 pub(crate) fn register_waker(&self) {
722 assert!(
723 !self.has_waker.swap(true, Ordering::AcqRel),
724 "Only a single `Waker` can be active per `Poll` instance"
725 );
726 }
727
728 /// Get access to the `sys::Selector`.
729 #[cfg(any(not(target_os = "wasi"), feature = "net"))]
730 pub(crate) fn selector(&self) -> &sys::Selector {
731 &self.selector
732 }
733}
734
735impl fmt::Debug for Registry {
736 fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
737 fmt.debug_struct("Registry").finish()
738 }
739}
740
741#[cfg(all(
742 unix,
743 not(mio_unsupported_force_poll_poll),
744 not(any(
745 target_os = "aix",
746 target_os = "espidf",
747 target_os = "haiku",
748 target_os = "fuchsia",
749 target_os = "hermit",
750 target_os = "hurd",
751 target_os = "nto",
752 target_os = "solaris",
753 target_os = "vita"
754 )),
755))]
756impl AsRawFd for Registry {
757 fn as_raw_fd(&self) -> RawFd {
758 self.selector.as_raw_fd()
759 }
760}
761
762cfg_os_poll! {
763 #[cfg(all(
764 unix,
765 not(mio_unsupported_force_poll_poll),
766 not(any(
767 target_os = "espidf",
768 target_os = "hermit",
769 target_os = "hurd",
770 target_os = "nto",
771 target_os = "solaris",
772 target_os = "vita"
773 )),
774 ))]
775 #[test]
776 pub fn as_raw_fd() {
777 let poll = Poll::new().unwrap();
778 assert!(poll.as_raw_fd() > 0);
779 }
780}