Type Alias NetworkEndian

pub type NetworkEndian = BigEndian;

Defines network byte order serialization.

Network byte order is defined by RFC 1700 to be big-endian, and is referred to in several protocol specifications. This type is an alias of BigEndian.

Note that this type has no value constructor. It is used purely at the type level.

Examples

Write and read i16 numbers in big endian order:

use byteorder::{ByteOrder, NetworkEndian, BigEndian};

let mut buf = [0; 2];
BigEndian::write_i16(&mut buf, -5_000);
assert_eq!(-5_000, NetworkEndian::read_i16(&buf));

Aliased Type

enum NetworkEndian {}

Variants

Layout

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 0 bytes (uninhabited)

Trait Implementations

impl ByteOrder for BigEndian

fn read_u16(buf: &[u8]) -> u16

Reads an unsigned 16 bit integer from buf.

fn read_u32(buf: &[u8]) -> u32

Reads an unsigned 32 bit integer from buf.

fn read_u64(buf: &[u8]) -> u64

Reads an unsigned 64 bit integer from buf.

fn read_u128(buf: &[u8]) -> u128

Reads an unsigned 128 bit integer from buf.

fn read_uint(buf: &[u8], nbytes: usize) -> u64

Reads an unsigned n-bytes integer from buf.

fn read_uint128(buf: &[u8], nbytes: usize) -> u128

Reads an unsigned n-bytes integer from buf.

fn write_u16(buf: &mut [u8], n: u16)

Writes an unsigned 16 bit integer n to buf.

fn write_u32(buf: &mut [u8], n: u32)

Writes an unsigned 32 bit integer n to buf.

fn write_u64(buf: &mut [u8], n: u64)

Writes an unsigned 64 bit integer n to buf.

fn write_u128(buf: &mut [u8], n: u128)

Writes an unsigned 128 bit integer n to buf.

fn write_uint(buf: &mut [u8], n: u64, nbytes: usize)

Writes an unsigned integer n to buf using only nbytes.

fn write_uint128(buf: &mut [u8], n: u128, nbytes: usize)

Writes an unsigned integer n to buf using only nbytes.

fn read_u16_into(src: &[u8], dst: &mut [u16])

Reads unsigned 16 bit integers from src into dst.

fn read_u32_into(src: &[u8], dst: &mut [u32])

Reads unsigned 32 bit integers from src into dst.

fn read_u64_into(src: &[u8], dst: &mut [u64])

Reads unsigned 64 bit integers from src into dst.

fn read_u128_into(src: &[u8], dst: &mut [u128])

Reads unsigned 128 bit integers from src into dst.

fn write_u16_into(src: &[u16], dst: &mut [u8])

Writes unsigned 16 bit integers from src into dst.

fn write_u32_into(src: &[u32], dst: &mut [u8])

Writes unsigned 32 bit integers from src into dst.

fn write_u64_into(src: &[u64], dst: &mut [u8])

Writes unsigned 64 bit integers from src into dst.

fn write_u128_into(src: &[u128], dst: &mut [u8])

Writes unsigned 128 bit integers from src into dst.

fn from_slice_u16(numbers: &mut [u16])

Converts the given slice of unsigned 16 bit integers to a particular endianness.

fn from_slice_u32(numbers: &mut [u32])

Converts the given slice of unsigned 32 bit integers to a particular endianness.

fn from_slice_u64(numbers: &mut [u64])

Converts the given slice of unsigned 64 bit integers to a particular endianness.

fn from_slice_u128(numbers: &mut [u128])

Converts the given slice of unsigned 128 bit integers to a particular endianness.

fn from_slice_f32(numbers: &mut [f32])

Converts the given slice of IEEE754 single-precision (4 bytes) floating point numbers to a particular endianness.

fn from_slice_f64(numbers: &mut [f64])

Converts the given slice of IEEE754 double-precision (8 bytes) floating point numbers to a particular endianness.

fn read_u24(buf: &[u8]) -> u32

Reads an unsigned 24 bit integer from buf, stored in u32.

fn read_u48(buf: &[u8]) -> u64

Reads an unsigned 48 bit integer from buf, stored in u64.

fn write_u24(buf: &mut [u8], n: u32)

Writes an unsigned 24 bit integer n to buf, stored in u32.

fn write_u48(buf: &mut [u8], n: u64)

Writes an unsigned 48 bit integer n to buf, stored in u64.

fn read_i16(buf: &[u8]) -> i16

Reads a signed 16 bit integer from buf.

fn read_i24(buf: &[u8]) -> i32

Reads a signed 24 bit integer from buf, stored in i32.

fn read_i32(buf: &[u8]) -> i32

Reads a signed 32 bit integer from buf.

fn read_i48(buf: &[u8]) -> i64

Reads a signed 48 bit integer from buf, stored in i64.

fn read_i64(buf: &[u8]) -> i64

Reads a signed 64 bit integer from buf.

fn read_i128(buf: &[u8]) -> i128

Reads a signed 128 bit integer from buf.

fn read_int(buf: &[u8], nbytes: usize) -> i64

Reads a signed n-bytes integer from buf.

fn read_int128(buf: &[u8], nbytes: usize) -> i128

Reads a signed n-bytes integer from buf.

fn read_f32(buf: &[u8]) -> f32

Reads a IEEE754 single-precision (4 bytes) floating point number.

fn read_f64(buf: &[u8]) -> f64

Reads a IEEE754 double-precision (8 bytes) floating point number.

fn write_i16(buf: &mut [u8], n: i16)

Writes a signed 16 bit integer n to buf.

fn write_i24(buf: &mut [u8], n: i32)

Writes a signed 24 bit integer n to buf, stored in i32.

fn write_i32(buf: &mut [u8], n: i32)

Writes a signed 32 bit integer n to buf.

fn write_i48(buf: &mut [u8], n: i64)

Writes a signed 48 bit integer n to buf, stored in i64.

fn write_i64(buf: &mut [u8], n: i64)

Writes a signed 64 bit integer n to buf.

fn write_i128(buf: &mut [u8], n: i128)

Writes a signed 128 bit integer n to buf.

fn write_int(buf: &mut [u8], n: i64, nbytes: usize)

Writes a signed integer n to buf using only nbytes.

fn write_int128(buf: &mut [u8], n: i128, nbytes: usize)

Writes a signed integer n to buf using only nbytes.

fn write_f32(buf: &mut [u8], n: f32)

Writes a IEEE754 single-precision (4 bytes) floating point number.

fn write_f64(buf: &mut [u8], n: f64)

Writes a IEEE754 double-precision (8 bytes) floating point number.

fn read_i16_into(src: &[u8], dst: &mut [i16])

Reads signed 16 bit integers from src to dst.

fn read_i32_into(src: &[u8], dst: &mut [i32])

Reads signed 32 bit integers from src into dst.

fn read_i64_into(src: &[u8], dst: &mut [i64])

Reads signed 64 bit integers from src into dst.

fn read_i128_into(src: &[u8], dst: &mut [i128])

Reads signed 128 bit integers from src into dst.

fn read_f32_into(src: &[u8], dst: &mut [f32])

Reads IEEE754 single-precision (4 bytes) floating point numbers from src into dst.

fn read_f32_into_unchecked(src: &[u8], dst: &mut [f32])

👎Deprecated since 1.3.0: please use read_f32_into instead

DEPRECATED.

fn read_f64_into(src: &[u8], dst: &mut [f64])

Reads IEEE754 single-precision (4 bytes) floating point numbers from src into dst.

fn read_f64_into_unchecked(src: &[u8], dst: &mut [f64])

👎Deprecated since 1.3.0: please use read_f64_into instead

DEPRECATED.

fn write_i8_into(src: &[i8], dst: &mut [u8])

Writes signed 8 bit integers from src into dst.

fn write_i16_into(src: &[i16], dst: &mut [u8])

Writes signed 16 bit integers from src into dst.

fn write_i32_into(src: &[i32], dst: &mut [u8])

Writes signed 32 bit integers from src into dst.

fn write_i64_into(src: &[i64], dst: &mut [u8])

Writes signed 64 bit integers from src into dst.

fn write_i128_into(src: &[i128], dst: &mut [u8])

Writes signed 128 bit integers from src into dst.

fn write_f32_into(src: &[f32], dst: &mut [u8])

Writes IEEE754 single-precision (4 bytes) floating point numbers from src into dst.

fn write_f64_into(src: &[f64], dst: &mut [u8])

Writes IEEE754 double-precision (8 bytes) floating point numbers from src into dst.

fn from_slice_i16(src: &mut [i16])

Converts the given slice of signed 16 bit integers to a particular endianness.

fn from_slice_i32(src: &mut [i32])

Converts the given slice of signed 32 bit integers to a particular endianness.

fn from_slice_i64(src: &mut [i64])

Converts the given slice of signed 64 bit integers to a particular endianness.

fn from_slice_i128(src: &mut [i128])

Converts the given slice of signed 128 bit integers to a particular endianness.

impl Clone for BigEndian

fn clone(&self) -> BigEndian

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for BigEndian

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for BigEndian

fn default() -> BigEndian

Returns the “default value” for a type.

impl Hash for BigEndian

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for BigEndian

fn cmp(&self, other: &BigEndian) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for BigEndian

fn eq(&self, other: &BigEndian) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for BigEndian

fn partial_cmp(&self, other: &BigEndian) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Copy for BigEndian

impl Eq for BigEndian

impl StructuralPartialEq for BigEndian