Struct UncasedStr 

pub struct UncasedStr(/* private fields */);

A cost-free reference to an uncased (case-insensitive, case-preserving) ASCII string.

This is typically created from an &str as follows:

use uncased::UncasedStr;

let ascii_ref: &UncasedStr = "Hello, world!".into();

Implementations

impl UncasedStr

pub const fn new(string: &str) -> &UncasedStr

Cost-free conversion from an &str reference to an UncasedStr.

This is a const fn on Rust 1.56+.

Example

use uncased::UncasedStr;

let uncased_str = UncasedStr::new("Hello!");
assert_eq!(uncased_str, "hello!");
assert_eq!(uncased_str, "Hello!");
assert_eq!(uncased_str, "HeLLo!");

pub fn as_str(&self) -> &str

Returns self as an &str.

Example

use uncased::UncasedStr;

let uncased_str = UncasedStr::new("Hello!");
assert_eq!(uncased_str.as_str(), "Hello!");
assert_ne!(uncased_str.as_str(), "hELLo!");

pub fn len(&self) -> usize

Returns the length, in bytes, of self.

Example

use uncased::UncasedStr;

let uncased_str = UncasedStr::new("Hello!");
assert_eq!(uncased_str.len(), 6);

pub fn is_empty(&self) -> bool

Returns true if self has a length of zero bytes.

Examples

use uncased::UncasedStr;

let s = UncasedStr::new("");
assert!(s.is_empty());

let s = UncasedStr::new("not empty");
assert!(!s.is_empty());

pub fn starts_with(&self, string: &str) -> bool

Returns true if self starts with any casing of the string string; otherwise, returns false.

Example

use uncased::UncasedStr;

let uncased_str = UncasedStr::new("MoOO");
assert!(uncased_str.starts_with("moo"));
assert!(uncased_str.starts_with("MOO"));
assert!(uncased_str.starts_with("MOOO"));
assert!(!uncased_str.starts_with("boo"));

let uncased_str = UncasedStr::new("Bèe");
assert!(!uncased_str.starts_with("Be"));
assert!(uncased_str.starts_with("Bè"));
assert!(uncased_str.starts_with("Bè"));
assert!(uncased_str.starts_with("bèe"));
assert!(uncased_str.starts_with("BèE"));

pub fn into_uncased(self: Box<UncasedStr>) -> Uncased<'static>

Available on crate feature alloc only.

Converts a Box<UncasedStr> into an Uncased without copying or allocating.

Example

use uncased::Uncased;

let uncased = Uncased::new("Hello!");
let boxed = uncased.clone().into_boxed_uncased();
assert_eq!(boxed.into_uncased(), uncased);

Trait Implementations

impl AsRef<[u8]> for UncasedStr

fn as_ref(&self) -> &[u8]

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<UncasedStr> for Uncased<'_>

fn as_ref(&self) -> &UncasedStr

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<str> for UncasedStr

fn as_ref(&self) -> &str

Converts this type into a shared reference of the (usually inferred) input type.

impl Borrow<UncasedStr> for Uncased<'_>

fn borrow(&self) -> &UncasedStr

Immutably borrows from an owned value.

impl Debug for UncasedStr

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for UncasedStr

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl From<&UncasedStr> for Arc<UncasedStr>

fn from(v: &UncasedStr) -> Arc<UncasedStr>

Converts to this type from the input type.

impl<'s, 'c: 's> From<&'c UncasedStr> for Uncased<'s>

fn from(string: &'c UncasedStr) -> Self

Converts to this type from the input type.

impl<'a> From<&'a str> for &'a UncasedStr

fn from(string: &'a str) -> &'a UncasedStr

Converts to this type from the input type.

impl Hash for UncasedStr

fn hash<H: Hasher>(&self, hasher: &mut H)

Feeds this value into the given Hasher.

impl<I: SliceIndex<str, Output = str>> Index<I> for UncasedStr

type Output = UncasedStr

The returned type after indexing.

fn index(&self, index: I) -> &Self::Output

Performs the indexing (container[index]) operation.

impl Ord for UncasedStr

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

impl PartialEq<&Uncased<'_>> for UncasedStr

fn eq(&self, other: &&Uncased<'_>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<&UncasedStr> for Uncased<'_>

fn eq(&self, other: &&UncasedStr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<&UncasedStr> for str

fn eq(&self, other: &&UncasedStr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<&str> for UncasedStr

fn eq(&self, other: &&str) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<String> for UncasedStr

fn eq(&self, other: &String) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Uncased<'_>> for &UncasedStr

fn eq(&self, other: &Uncased<'_>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Uncased<'_>> for UncasedStr

fn eq(&self, other: &Uncased<'_>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for &Uncased<'_>

fn eq(&self, other: &UncasedStr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for &str

fn eq(&self, other: &UncasedStr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for String

fn eq(&self, other: &UncasedStr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for Uncased<'_>

fn eq(&self, other: &UncasedStr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<UncasedStr> for str

fn eq(&self, other: &UncasedStr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<str> for &UncasedStr

fn eq(&self, other: &str) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<str> for UncasedStr

fn eq(&self, other: &str) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for UncasedStr

fn eq(&self, other: &UncasedStr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<&Uncased<'_>> for UncasedStr

fn partial_cmp(&self, other: &&Uncased<'_>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<&UncasedStr> for Uncased<'_>

fn partial_cmp(&self, other: &&UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<String> for UncasedStr

fn partial_cmp(&self, other: &String) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Uncased<'_>> for &UncasedStr

fn partial_cmp(&self, other: &Uncased<'_>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Uncased<'_>> for UncasedStr

fn partial_cmp(&self, other: &Uncased<'_>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<UncasedStr> for &Uncased<'_>

fn partial_cmp(&self, other: &UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<UncasedStr> for String

fn partial_cmp(&self, other: &UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<UncasedStr> for Uncased<'_>

fn partial_cmp(&self, other: &UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<UncasedStr> for str

fn partial_cmp(&self, other: &UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<str> for UncasedStr

fn partial_cmp(&self, other: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd for UncasedStr

fn partial_cmp(&self, other: &UncasedStr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Eq for UncasedStr

Layout

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: (unsized)