Struct Utf8Sequences

pub struct Utf8Sequences { /* private fields */ }

An iterator over ranges of matching UTF-8 byte sequences.

The iteration represents an alternation of comprehensive byte sequences that match precisely the set of UTF-8 encoded scalar values.

A byte sequence corresponds to one of the scalar values in the range given if and only if it completely matches exactly one of the sequences of byte ranges produced by this iterator.

Each sequence of byte ranges matches a unique set of bytes. That is, no two sequences will match the same bytes.

Example

This shows how to match an arbitrary byte sequence against a range of scalar values.

use regex_syntax::utf8::{Utf8Sequences, Utf8Sequence};

fn matches(seqs: &[Utf8Sequence], bytes: &[u8]) -> bool {
    for range in seqs {
        if range.matches(bytes) {
            return true;
        }
    }
    false
}

// Test the basic multilingual plane.
let seqs: Vec<_> = Utf8Sequences::new('\u{0}', '\u{FFFF}').collect();

// UTF-8 encoding of 'a'.
assert!(matches(&seqs, &[0x61]));
// UTF-8 encoding of '☃' (`\u{2603}`).
assert!(matches(&seqs, &[0xE2, 0x98, 0x83]));
// UTF-8 encoding of `\u{10348}` (outside the BMP).
assert!(!matches(&seqs, &[0xF0, 0x90, 0x8D, 0x88]));
// Tries to match against a UTF-8 encoding of a surrogate codepoint,
// which is invalid UTF-8, and therefore fails, despite the fact that
// the corresponding codepoint (0xD800) falls in the range given.
assert!(!matches(&seqs, &[0xED, 0xA0, 0x80]));
// And fails against plain old invalid UTF-8.
assert!(!matches(&seqs, &[0xFF, 0xFF]));

If this example seems circuitous, that’s because it is! It’s meant to be illustrative. In practice, you could just try to decode your byte sequence and compare it with the scalar value range directly. However, this is not always possible (for example, in a byte based automaton).

Implementations

impl Utf8Sequences

pub fn new(start: char, end: char) -> Self

Create a new iterator over UTF-8 byte ranges for the scalar value range given.

Trait Implementations

impl Debug for Utf8Sequences

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Iterator for Utf8Sequences

type Item = Utf8Sequence

The type of the elements being iterated over.

fn next(&mut self) -> Option<Self::Item>

Advances the iterator and returns the next value.

fn next_chunk<const N: usize>( &mut self, ) -> Result<[Self::Item; N], IntoIter<Self::Item, N>>

where Self: Sized,

🔬This is a nightly-only experimental API. (iter_next_chunk)

Advances the iterator and returns an array containing the next N values.

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator.

fn count(self) -> usize

where Self: Sized,

Consumes the iterator, counting the number of iterations and returning it.

fn last(self) -> Option<Self::Item>

where Self: Sized,

Consumes the iterator, returning the last element.

fn advance_by(&mut self, n: usize) -> Result<(), NonZero<usize>>

🔬This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator by n elements.

fn nth(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element of the iterator.

fn step_by(self, step: usize) -> StepBy<Self>

where Self: Sized,

Creates an iterator starting at the same point, but stepping by the given amount at each iteration.

fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter>

where Self: Sized, U: IntoIterator<Item = Self::Item>,

Takes two iterators and creates a new iterator over both in sequence.

fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter>

where Self: Sized, U: IntoIterator,

‘Zips up’ two iterators into a single iterator of pairs.

fn intersperse(self, separator: Self::Item) -> Intersperse<Self>

where Self: Sized, Self::Item: Clone,

🔬This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places a copy of separator between adjacent items of the original iterator.

fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G>

where Self: Sized, G: FnMut() -> Self::Item,

🔬This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places an item generated by separator between adjacent items of the original iterator.

fn map<B, F>(self, f: F) -> Map<Self, F>

where Self: Sized, F: FnMut(Self::Item) -> B,

Takes a closure and creates an iterator which calls that closure on each element.

fn for_each<F>(self, f: F)

where Self: Sized, F: FnMut(Self::Item),

Calls a closure on each element of an iterator.

fn filter<P>(self, predicate: P) -> Filter<Self, P>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator which uses a closure to determine if an element should be yielded.

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F>

where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both filters and maps.

fn enumerate(self) -> Enumerate<Self>

where Self: Sized,

Creates an iterator which gives the current iteration count as well as the next value.

fn peekable(self) -> Peekable<Self>

where Self: Sized,

Creates an iterator which can use the peek and peek_mut methods to look at the next element of the iterator without consuming it. See their documentation for more information.

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that skips elements based on a predicate.

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that yields elements based on a predicate.

fn map_while<B, P>(self, predicate: P) -> MapWhile<Self, P>

where Self: Sized, P: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both yields elements based on a predicate and maps.

fn skip(self, n: usize) -> Skip<Self>

where Self: Sized,

Creates an iterator that skips the first n elements.

fn take(self, n: usize) -> Take<Self>

where Self: Sized,

Creates an iterator that yields the first n elements, or fewer if the underlying iterator ends sooner.

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F>

where Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

An iterator adapter which, like fold, holds internal state, but unlike fold, produces a new iterator.

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>

where Self: Sized, U: IntoIterator, F: FnMut(Self::Item) -> U,

Creates an iterator that works like map, but flattens nested structure.

fn map_windows<F, R, const N: usize>(self, f: F) -> MapWindows<Self, F, N>

where Self: Sized, F: FnMut(&[Self::Item; N]) -> R,

🔬This is a nightly-only experimental API. (iter_map_windows)

Calls the given function f for each contiguous window of size N over self and returns an iterator over the outputs of f. Like slice::windows(), the windows during mapping overlap as well.

fn fuse(self) -> Fuse<Self>

where Self: Sized,

Creates an iterator which ends after the first None.

fn inspect<F>(self, f: F) -> Inspect<Self, F>

where Self: Sized, F: FnMut(&Self::Item),

Does something with each element of an iterator, passing the value on.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Borrows an iterator, rather than consuming it.

fn collect<B>(self) -> B

where B: FromIterator<Self::Item>, Self: Sized,

Transforms an iterator into a collection.

fn collect_into<E>(self, collection: &mut E) -> &mut E

where E: Extend<Self::Item>, Self: Sized,

🔬This is a nightly-only experimental API. (iter_collect_into)

Collects all the items from an iterator into a collection.

fn partition<B, F>(self, f: F) -> (B, B)

where Self: Sized, B: Default + Extend<Self::Item>, F: FnMut(&Self::Item) -> bool,

Consumes an iterator, creating two collections from it.

fn is_partitioned<P>(self, predicate: P) -> bool

where Self: Sized, P: FnMut(Self::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_is_partitioned)

Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false.

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> R

where Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

An iterator method that applies a function as long as it returns successfully, producing a single, final value.

fn try_for_each<F, R>(&mut self, f: F) -> R

where Self: Sized, F: FnMut(Self::Item) -> R, R: Try<Output = ()>,

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error.

fn fold<B, F>(self, init: B, f: F) -> B

where Self: Sized, F: FnMut(B, Self::Item) -> B,

Folds every element into an accumulator by applying an operation, returning the final result.

fn reduce<F>(self, f: F) -> Option<Self::Item>

where Self: Sized, F: FnMut(Self::Item, Self::Item) -> Self::Item,

Reduces the elements to a single one, by repeatedly applying a reducing operation.

fn try_reduce<R>( &mut self, f: impl FnMut(Self::Item, Self::Item) -> R, ) -> <<R as Try>::Residual as Residual<Option<<R as Try>::Output>>>::TryType

where Self: Sized, R: Try<Output = Self::Item>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (iterator_try_reduce)

Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately.

fn all<F>(&mut self, f: F) -> bool

where Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if every element of the iterator matches a predicate.

fn any<F>(&mut self, f: F) -> bool

where Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if any element of the iterator matches a predicate.

fn find<P>(&mut self, predicate: P) -> Option<Self::Item>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator that satisfies a predicate.

fn find_map<B, F>(&mut self, f: F) -> Option<B>

where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Applies function to the elements of iterator and returns the first non-none result.

fn try_find<R>( &mut self, f: impl FnMut(&Self::Item) -> R, ) -> <<R as Try>::Residual as Residual<Option<Self::Item>>>::TryType

where Self: Sized, R: Try<Output = bool>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (try_find)

Applies function to the elements of iterator and returns the first true result or the first error.

fn position<P>(&mut self, predicate: P) -> Option<usize>

where Self: Sized, P: FnMut(Self::Item) -> bool,

Searches for an element in an iterator, returning its index.

fn max(self) -> Option<Self::Item>

where Self: Sized, Self::Item: Ord,

Returns the maximum element of an iterator.

fn min(self) -> Option<Self::Item>

where Self: Sized, Self::Item: Ord,

Returns the minimum element of an iterator.

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item>

where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value from the specified function.

fn max_by<F>(self, compare: F) -> Option<Self::Item>

where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function.

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item>

where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value from the specified function.

fn min_by<F>(self, compare: F) -> Option<Self::Item>

where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function.

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB)

where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Iterator<Item = (A, B)>,

Converts an iterator of pairs into a pair of containers.

fn copied<'a, T>(self) -> Copied<Self>

where T: 'a + Copy, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which copies all of its elements.

fn cloned<'a, T>(self) -> Cloned<Self>

where T: 'a + Clone, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which clones all of its elements.

fn array_chunks<const N: usize>(self) -> ArrayChunks<Self, N>

where Self: Sized,

🔬This is a nightly-only experimental API. (iter_array_chunks)

Returns an iterator over N elements of the iterator at a time.

fn sum<S>(self) -> S

where Self: Sized, S: Sum<Self::Item>,

Sums the elements of an iterator.

fn product<P>(self) -> P

where Self: Sized, P: Product<Self::Item>,

Iterates over the entire iterator, multiplying all the elements

fn cmp<I>(self, other: I) -> Ordering

where I: IntoIterator<Item = Self::Item>, Self::Item: Ord, Self: Sized,

Lexicographically compares the elements of this Iterator with those of another.

fn cmp_by<I, F>(self, other: I, cmp: F) -> Ordering

where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn partial_cmp<I>(self, other: I) -> Option<Ordering>

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Lexicographically compares the PartialOrd elements of this Iterator with those of another. The comparison works like short-circuit evaluation, returning a result without comparing the remaining elements. As soon as an order can be determined, the evaluation stops and a result is returned.

fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering>

where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn eq<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are equal to those of another.

fn eq_by<I, F>(self, other: I, eq: F) -> bool

where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_order_by)

Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function.

fn ne<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are not equal to those of another.

fn lt<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less than those of another.

fn le<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less or equal to those of another.

fn gt<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than those of another.

fn ge<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another.

fn is_sorted(self) -> bool

where Self: Sized, Self::Item: PartialOrd,

Checks if the elements of this iterator are sorted.

fn is_sorted_by<F>(self, compare: F) -> bool

where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> bool,

Checks if the elements of this iterator are sorted using the given comparator function.

fn is_sorted_by_key<F, K>(self, f: F) -> bool

where Self: Sized, F: FnMut(Self::Item) -> K, K: PartialOrd,

Checks if the elements of this iterator are sorted using the given key extraction function.

impl FusedIterator for Utf8Sequences

Layout

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 24 bytes