Struct BitPtrRange

#[repr(C)]
pub struct BitPtrRange<M = Const, T = usize, O = Lsb0>
where
    M: Mutability,
    T: BitStore,
    O: BitOrder,
{
    pub start: BitPtr<M, T, O>,
    pub end: BitPtr<M, T, O>,
}

Bit-Pointer Range

This type is equivalent in purpose, but superior in functionality, to Range<BitPtr<M, T, O>>. If the standard library stabilizes Step, the trait used to drive Range operations, then this type will likely be destroyed in favor of an impl Step for BitPtr block and use of standard ranges.

Like Range, this is a half-open set where the low bit-pointer selects the first live bit in a span and the high bit-pointer selects the first dead bit after the span.

This type is not capable of inspecting provenance, and has no requirement of its own that both bit-pointers be derived from the same provenance region. It is safe to construct and use with any pair of bit-pointers; however, the bit-pointers it produces are, necessarily, unsafe to use.

Original

Range<*bool>

Memory Representation

BitPtr is required to be repr(packed) in order to satisfy the BitRef size optimizations. In order to stay minimally sized itself, this type has no alignment requirement, and reading either bit-pointer may incur a misalignment penalty. Reads are always safe and valid; they may merely be slow.

Type Parameters

This takes the same type parameters as BitPtr, as it is simply a pair of bit-pointers with range semantics.

Fields

start: BitPtr<M, T, O>

The lower, inclusive, bound of the range. The bit to which this points is considered live.

end: BitPtr<M, T, O>

The higher, exclusive, bound of the range. The bit to which this points is considered dead, and the pointer may be one bit beyond the bounds of an allocation region.

Because Rust and LLVM both define the address of base + (len * width) as being within the provenance of base, even though that address may itself be the base address of another region in a different provenance, and bit-pointers are always composed of an ordinary memory address and a bit-counter, the ending bit-pointer is always valid.

Implementations

impl<M, T, O> BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

pub const EMPTY: Self = _

The canonical empty range. All ranges with zero length (equal .start and .end) are equally empty.

pub fn from_range(_: Range<BitPtr<M, T, O>>) -> Self

Explicitly converts a Range<BitPtr> into a BitPtrRange.

pub fn into_range(self) -> Range<BitPtr<M, T, O>>

Explicitly converts a BitPtrRange into a Range<BitPtr>.

pub fn is_empty(&self) -> bool

Tests if the range is empty (the distance between bit-pointers is 0).

Original

Range::is_empty

Examples

use bitvec::prelude::*;
use bitvec::ptr::BitPtrRange;

let data = 0u8;
let bp = BitPtr::<_, _, Lsb0>::from_ref(&data);
let mut range = BitPtrRange::from_range(bp .. bp.wrapping_add(1));

assert!(!range.is_empty());
assert_ne!(range.start, range.end);

range.next();

assert!(range.is_empty());
assert_eq!(range.start, range.end);

pub fn contains<M2, T2>(&self, pointer: &BitPtr<M2, T2, O>) -> bool

where M2: Mutability, T2: BitStore,

Tests if a given bit-pointer is contained within the range.

Bit-pointer ordering is defined when the types have the same exact BitOrder type parameter and the same BitStore::Mem associated type (but are free to differ in alias condition!). Inclusion in a range occurs when the bit-pointer is not strictly less than the range start, and is strictly less than the range end.

Original

Range::contains

Examples

use bitvec::prelude::*;
use bitvec::ptr::BitPtrRange;
use core::cell::Cell;

let data = 0u16;
let bp = BitPtr::<_, _, Lsb0>::from_ref(&data);

let mut range = BitPtrRange::from_range(bp .. bp.wrapping_add(16));
range.nth(2);
range.nth_back(2);

assert!(bp < range.start);
assert!(!range.contains(&bp));

let mid = bp.wrapping_add(8);

let same_mem = mid.cast::<Cell<u16>>();
assert!(range.contains(&mid));

Casting to a different BitStore type whose Mem parameter differs from the range always results in a false response, even if the pointer being tested is numerically within the range.

Trait Implementations

impl<M, T, O> Clone for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<M, T, O> Debug for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<M, T, O> Default for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

fn default() -> Self

Returns the “default value” for a type.

impl<M, T, O> DoubleEndedIterator for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

fn next_back(&mut self) -> Option<Self::Item>

Removes and returns an element from the end of the iterator.

fn nth_back(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element from the end of the iterator.

fn advance_back_by(&mut self, n: usize) -> Result<(), NonZero<usize>>

🔬This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator from the back by n elements.

fn try_rfold<B, F, R>(&mut self, init: B, f: F) -> R

where Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

This is the reverse version of Iterator::try_fold(): it takes elements starting from the back of the iterator.

fn rfold<B, F>(self, init: B, f: F) -> B

where Self: Sized, F: FnMut(B, Self::Item) -> B,

An iterator method that reduces the iterator’s elements to a single, final value, starting from the back.

fn rfind<P>(&mut self, predicate: P) -> Option<Self::Item>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator from the back that satisfies a predicate.

impl<M, T, O> ExactSizeIterator for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

fn len(&self) -> usize

Returns the exact remaining length of the iterator.

fn is_empty(&self) -> bool

🔬This is a nightly-only experimental API. (exact_size_is_empty)

Returns true if the iterator is empty.

impl<M, T, O> From<BitPtrRange<M, T, O>> for Range<BitPtr<M, T, O>>

where M: Mutability, T: BitStore, O: BitOrder,

fn from(range: BitPtrRange<M, T, O>) -> Self

Converts to this type from the input type.

impl<M, T, O> From<Range<BitPtr<M, T, O>>> for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

fn from(range: Range<BitPtr<M, T, O>>) -> Self

Converts to this type from the input type.

impl<M, T, O> Hash for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

fn hash<H>(&self, state: &mut H)

where H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<M, T, O> Iterator for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

type Item = BitPtr<M, T, O>

The type of the elements being iterated over.

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator.

fn count(self) -> usize

Consumes the iterator, counting the number of iterations and returning it.

fn last(self) -> Option<Self::Item>

Consumes the iterator, returning the last element.

fn next(&mut self) -> Option<Self::Item>

Advances the iterator and returns the next value.

fn nth(&mut self, n: usize) -> Option<Self::Item>

Returns the nth element of the iterator.

fn next_chunk<const N: usize>( &mut self, ) -> Result<[Self::Item; N], IntoIter<Self::Item, N>>

where Self: Sized,

🔬This is a nightly-only experimental API. (iter_next_chunk)

Advances the iterator and returns an array containing the next N values.

fn advance_by(&mut self, n: usize) -> Result<(), NonZero<usize>>

🔬This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator by n elements.

fn step_by(self, step: usize) -> StepBy<Self>

where Self: Sized,

Creates an iterator starting at the same point, but stepping by the given amount at each iteration.

fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter>

where Self: Sized, U: IntoIterator<Item = Self::Item>,

Takes two iterators and creates a new iterator over both in sequence.

fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter>

where Self: Sized, U: IntoIterator,

‘Zips up’ two iterators into a single iterator of pairs.

fn intersperse(self, separator: Self::Item) -> Intersperse<Self>

where Self: Sized, Self::Item: Clone,

🔬This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places a copy of separator between adjacent items of the original iterator.

fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G>

where Self: Sized, G: FnMut() -> Self::Item,

🔬This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places an item generated by separator between adjacent items of the original iterator.

fn map<B, F>(self, f: F) -> Map<Self, F>

where Self: Sized, F: FnMut(Self::Item) -> B,

Takes a closure and creates an iterator which calls that closure on each element.

fn for_each<F>(self, f: F)

where Self: Sized, F: FnMut(Self::Item),

Calls a closure on each element of an iterator.

fn filter<P>(self, predicate: P) -> Filter<Self, P>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator which uses a closure to determine if an element should be yielded.

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F>

where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both filters and maps.

fn enumerate(self) -> Enumerate<Self>

where Self: Sized,

Creates an iterator which gives the current iteration count as well as the next value.

fn peekable(self) -> Peekable<Self>

where Self: Sized,

Creates an iterator which can use the peek and peek_mut methods to look at the next element of the iterator without consuming it. See their documentation for more information.

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that skips elements based on a predicate.

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that yields elements based on a predicate.

fn map_while<B, P>(self, predicate: P) -> MapWhile<Self, P>

where Self: Sized, P: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both yields elements based on a predicate and maps.

fn skip(self, n: usize) -> Skip<Self>

where Self: Sized,

Creates an iterator that skips the first n elements.

fn take(self, n: usize) -> Take<Self>

where Self: Sized,

Creates an iterator that yields the first n elements, or fewer if the underlying iterator ends sooner.

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F>

where Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

An iterator adapter which, like fold, holds internal state, but unlike fold, produces a new iterator.

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>

where Self: Sized, U: IntoIterator, F: FnMut(Self::Item) -> U,

Creates an iterator that works like map, but flattens nested structure.

fn map_windows<F, R, const N: usize>(self, f: F) -> MapWindows<Self, F, N>

where Self: Sized, F: FnMut(&[Self::Item; N]) -> R,

🔬This is a nightly-only experimental API. (iter_map_windows)

Calls the given function f for each contiguous window of size N over self and returns an iterator over the outputs of f. Like slice::windows(), the windows during mapping overlap as well.

fn fuse(self) -> Fuse<Self>

where Self: Sized,

Creates an iterator which ends after the first None.

fn inspect<F>(self, f: F) -> Inspect<Self, F>

where Self: Sized, F: FnMut(&Self::Item),

Does something with each element of an iterator, passing the value on.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Borrows an iterator, rather than consuming it.

fn collect<B>(self) -> B

where B: FromIterator<Self::Item>, Self: Sized,

Transforms an iterator into a collection.

fn collect_into<E>(self, collection: &mut E) -> &mut E

where E: Extend<Self::Item>, Self: Sized,

🔬This is a nightly-only experimental API. (iter_collect_into)

Collects all the items from an iterator into a collection.

fn partition<B, F>(self, f: F) -> (B, B)

where Self: Sized, B: Default + Extend<Self::Item>, F: FnMut(&Self::Item) -> bool,

Consumes an iterator, creating two collections from it.

fn partition_in_place<'a, T, P>(self, predicate: P) -> usize

where T: 'a, Self: Sized + DoubleEndedIterator<Item = &'a mut T>, P: FnMut(&T) -> bool,

🔬This is a nightly-only experimental API. (iter_partition_in_place)

Reorders the elements of this iterator in-place according to the given predicate, such that all those that return true precede all those that return false. Returns the number of true elements found.

fn is_partitioned<P>(self, predicate: P) -> bool

where Self: Sized, P: FnMut(Self::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_is_partitioned)

Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false.

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> R

where Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

An iterator method that applies a function as long as it returns successfully, producing a single, final value.

fn try_for_each<F, R>(&mut self, f: F) -> R

where Self: Sized, F: FnMut(Self::Item) -> R, R: Try<Output = ()>,

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error.

fn fold<B, F>(self, init: B, f: F) -> B

where Self: Sized, F: FnMut(B, Self::Item) -> B,

Folds every element into an accumulator by applying an operation, returning the final result.

fn reduce<F>(self, f: F) -> Option<Self::Item>

where Self: Sized, F: FnMut(Self::Item, Self::Item) -> Self::Item,

Reduces the elements to a single one, by repeatedly applying a reducing operation.

fn try_reduce<R>( &mut self, f: impl FnMut(Self::Item, Self::Item) -> R, ) -> <<R as Try>::Residual as Residual<Option<<R as Try>::Output>>>::TryType

where Self: Sized, R: Try<Output = Self::Item>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (iterator_try_reduce)

Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately.

fn all<F>(&mut self, f: F) -> bool

where Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if every element of the iterator matches a predicate.

fn any<F>(&mut self, f: F) -> bool

where Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if any element of the iterator matches a predicate.

fn find<P>(&mut self, predicate: P) -> Option<Self::Item>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator that satisfies a predicate.

fn find_map<B, F>(&mut self, f: F) -> Option<B>

where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Applies function to the elements of iterator and returns the first non-none result.

fn try_find<R>( &mut self, f: impl FnMut(&Self::Item) -> R, ) -> <<R as Try>::Residual as Residual<Option<Self::Item>>>::TryType

where Self: Sized, R: Try<Output = bool>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (try_find)

Applies function to the elements of iterator and returns the first true result or the first error.

fn position<P>(&mut self, predicate: P) -> Option<usize>

where Self: Sized, P: FnMut(Self::Item) -> bool,

Searches for an element in an iterator, returning its index.

fn rposition<P>(&mut self, predicate: P) -> Option<usize>

where P: FnMut(Self::Item) -> bool, Self: Sized + ExactSizeIterator + DoubleEndedIterator,

Searches for an element in an iterator from the right, returning its index.

fn max(self) -> Option<Self::Item>

where Self: Sized, Self::Item: Ord,

Returns the maximum element of an iterator.

fn min(self) -> Option<Self::Item>

where Self: Sized, Self::Item: Ord,

Returns the minimum element of an iterator.

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item>

where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value from the specified function.

fn max_by<F>(self, compare: F) -> Option<Self::Item>

where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function.

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item>

where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value from the specified function.

fn min_by<F>(self, compare: F) -> Option<Self::Item>

where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function.

fn rev(self) -> Rev<Self>

where Self: Sized + DoubleEndedIterator,

Reverses an iterator’s direction.

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB)

where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Iterator<Item = (A, B)>,

Converts an iterator of pairs into a pair of containers.

fn copied<'a, T>(self) -> Copied<Self>

where T: 'a + Copy, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which copies all of its elements.

fn cloned<'a, T>(self) -> Cloned<Self>

where T: 'a + Clone, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which clones all of its elements.

fn cycle(self) -> Cycle<Self>

where Self: Sized + Clone,

Repeats an iterator endlessly.

fn array_chunks<const N: usize>(self) -> ArrayChunks<Self, N>

where Self: Sized,

🔬This is a nightly-only experimental API. (iter_array_chunks)

Returns an iterator over N elements of the iterator at a time.

fn sum<S>(self) -> S

where Self: Sized, S: Sum<Self::Item>,

Sums the elements of an iterator.

fn product<P>(self) -> P

where Self: Sized, P: Product<Self::Item>,

Iterates over the entire iterator, multiplying all the elements

fn cmp<I>(self, other: I) -> Ordering

where I: IntoIterator<Item = Self::Item>, Self::Item: Ord, Self: Sized,

Lexicographically compares the elements of this Iterator with those of another.

fn cmp_by<I, F>(self, other: I, cmp: F) -> Ordering

where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn partial_cmp<I>(self, other: I) -> Option<Ordering>

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Lexicographically compares the PartialOrd elements of this Iterator with those of another. The comparison works like short-circuit evaluation, returning a result without comparing the remaining elements. As soon as an order can be determined, the evaluation stops and a result is returned.

fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering>

where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn eq<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are equal to those of another.

fn eq_by<I, F>(self, other: I, eq: F) -> bool

where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_order_by)

Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function.

fn ne<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are not equal to those of another.

fn lt<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less than those of another.

fn le<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less or equal to those of another.

fn gt<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than those of another.

fn ge<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another.

fn is_sorted(self) -> bool

where Self: Sized, Self::Item: PartialOrd,

Checks if the elements of this iterator are sorted.

fn is_sorted_by<F>(self, compare: F) -> bool

where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> bool,

Checks if the elements of this iterator are sorted using the given comparator function.

fn is_sorted_by_key<F, K>(self, f: F) -> bool

where Self: Sized, F: FnMut(Self::Item) -> K, K: PartialOrd,

Checks if the elements of this iterator are sorted using the given key extraction function.

impl<M1, M2, O, T1, T2> PartialEq<BitPtrRange<M2, T2, O>> for BitPtrRange<M1, T1, O>

where M1: Mutability, M2: Mutability, O: BitOrder, T1: BitStore, T2: BitStore,

fn eq(&self, other: &BitPtrRange<M2, T2, O>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<M, T, O> RangeBounds<BitPtr<M, T, O>> for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

fn start_bound(&self) -> Bound<&BitPtr<M, T, O>>

Start index bound.

fn end_bound(&self) -> Bound<&BitPtr<M, T, O>>

End index bound.

fn contains<U>(&self, item: &U) -> bool

where T: PartialOrd<U>, U: PartialOrd<T> + ?Sized,

Returns true if item is contained in the range.

impl<M, T, O> Eq for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

impl<M, T, O> FusedIterator for BitPtrRange<M, T, O>

where M: Mutability, T: BitStore, O: BitOrder,

Layout

Note: Unable to compute type layout, possibly due to this type having generic parameters. Layout can only be computed for concrete, fully-instantiated types.