Struct BitSet

pub struct BitSet<B = u32> { /* private fields */ }

Implementations

impl BitSet<u32>

pub fn new() -> Self

Creates a new empty BitSet.

Examples

use bit_set::BitSet;

let mut s = BitSet::new();

pub fn with_capacity(nbits: usize) -> Self

Creates a new BitSet with initially no contents, able to hold nbits elements without resizing.

Examples

use bit_set::BitSet;

let mut s = BitSet::with_capacity(100);
assert!(s.capacity() >= 100);

pub fn from_bit_vec(bit_vec: BitVec) -> Self

Creates a new BitSet from the given bit vector.

Examples

extern crate bit_vec;
extern crate bit_set;

fn main() {
    use bit_vec::BitVec;
    use bit_set::BitSet;

    let bv = BitVec::from_bytes(&[0b01100000]);
    let s = BitSet::from_bit_vec(bv);

    // Print 1, 2 in arbitrary order
    for x in s.iter() {
        println!("{}", x);
    }
}

pub fn from_bytes(bytes: &[u8]) -> Self

impl<B: BitBlock> BitSet<B>

pub fn capacity(&self) -> usize

Returns the capacity in bits for this bit vector. Inserting any element less than this amount will not trigger a resizing.

Examples

use bit_set::BitSet;

let mut s = BitSet::with_capacity(100);
assert!(s.capacity() >= 100);

pub fn reserve_len(&mut self, len: usize)

Reserves capacity for the given BitSet to contain len distinct elements. In the case of BitSet this means reallocations will not occur as long as all inserted elements are less than len.

The collection may reserve more space to avoid frequent reallocations.

Examples

use bit_set::BitSet;

let mut s = BitSet::new();
s.reserve_len(10);
assert!(s.capacity() >= 10);

pub fn reserve_len_exact(&mut self, len: usize)

Reserves the minimum capacity for the given BitSet to contain len distinct elements. In the case of BitSet this means reallocations will not occur as long as all inserted elements are less than len.

Note that the allocator may give the collection more space than it requests. Therefore capacity can not be relied upon to be precisely minimal. Prefer reserve_len if future insertions are expected.

Examples

use bit_set::BitSet;

let mut s = BitSet::new();
s.reserve_len_exact(10);
assert!(s.capacity() >= 10);

pub fn into_bit_vec(self) -> BitVec<B>

Consumes this set to return the underlying bit vector.

Examples

use bit_set::BitSet;

let mut s = BitSet::new();
s.insert(0);
s.insert(3);

let bv = s.into_bit_vec();
assert!(bv[0]);
assert!(bv[3]);

pub fn get_ref(&self) -> &BitVec<B>

Returns a reference to the underlying bit vector.

Examples

use bit_set::BitSet;

let mut s = BitSet::new();
s.insert(0);

let bv = s.get_ref();
assert_eq!(bv[0], true);

pub fn shrink_to_fit(&mut self)

Truncates the underlying vector to the least length required.

Examples

use bit_set::BitSet;

let mut s = BitSet::new();
s.insert(32183231);
s.remove(32183231);

// Internal storage will probably be bigger than necessary
println!("old capacity: {}", s.capacity());

// Now should be smaller
s.shrink_to_fit();
println!("new capacity: {}", s.capacity());

pub fn iter(&self) -> Iter<'_, B>

Iterator over each usize stored in the BitSet.

Examples

use bit_set::BitSet;

let s = BitSet::from_bytes(&[0b01001010]);

// Print 1, 4, 6 in arbitrary order
for x in s.iter() {
    println!("{}", x);
}

pub fn union<'a>(&'a self, other: &'a Self) -> Union<'a, B>

Iterator over each usize stored in self union other. See union_with for an efficient in-place version.

Examples

use bit_set::BitSet;

let a = BitSet::from_bytes(&[0b01101000]);
let b = BitSet::from_bytes(&[0b10100000]);

// Print 0, 1, 2, 4 in arbitrary order
for x in a.union(&b) {
    println!("{}", x);
}

pub fn intersection<'a>(&'a self, other: &'a Self) -> Intersection<'a, B>

Iterator over each usize stored in self intersect other. See intersect_with for an efficient in-place version.

Examples

use bit_set::BitSet;

let a = BitSet::from_bytes(&[0b01101000]);
let b = BitSet::from_bytes(&[0b10100000]);

// Print 2
for x in a.intersection(&b) {
    println!("{}", x);
}

pub fn difference<'a>(&'a self, other: &'a Self) -> Difference<'a, B>

Iterator over each usize stored in the self setminus other. See difference_with for an efficient in-place version.

Examples

use bit_set::BitSet;

let a = BitSet::from_bytes(&[0b01101000]);
let b = BitSet::from_bytes(&[0b10100000]);

// Print 1, 4 in arbitrary order
for x in a.difference(&b) {
    println!("{}", x);
}

// Note that difference is not symmetric,
// and `b - a` means something else.
// This prints 0
for x in b.difference(&a) {
    println!("{}", x);
}

pub fn symmetric_difference<'a>( &'a self, other: &'a Self, ) -> SymmetricDifference<'a, B>

Iterator over each usize stored in the symmetric difference of self and other. See symmetric_difference_with for an efficient in-place version.

Examples

use bit_set::BitSet;

let a = BitSet::from_bytes(&[0b01101000]);
let b = BitSet::from_bytes(&[0b10100000]);

// Print 0, 1, 4 in arbitrary order
for x in a.symmetric_difference(&b) {
    println!("{}", x);
}

pub fn union_with(&mut self, other: &Self)

Unions in-place with the specified other bit vector.

Examples

use bit_set::BitSet;

let a   = 0b01101000;
let b   = 0b10100000;
let res = 0b11101000;

let mut a = BitSet::from_bytes(&[a]);
let b = BitSet::from_bytes(&[b]);
let res = BitSet::from_bytes(&[res]);

a.union_with(&b);
assert_eq!(a, res);

pub fn intersect_with(&mut self, other: &Self)

Intersects in-place with the specified other bit vector.

Examples

use bit_set::BitSet;

let a   = 0b01101000;
let b   = 0b10100000;
let res = 0b00100000;

let mut a = BitSet::from_bytes(&[a]);
let b = BitSet::from_bytes(&[b]);
let res = BitSet::from_bytes(&[res]);

a.intersect_with(&b);
assert_eq!(a, res);

pub fn difference_with(&mut self, other: &Self)

Makes this bit vector the difference with the specified other bit vector in-place.

Examples

use bit_set::BitSet;

let a   = 0b01101000;
let b   = 0b10100000;
let a_b = 0b01001000; // a - b
let b_a = 0b10000000; // b - a

let mut bva = BitSet::from_bytes(&[a]);
let bvb = BitSet::from_bytes(&[b]);
let bva_b = BitSet::from_bytes(&[a_b]);
let bvb_a = BitSet::from_bytes(&[b_a]);

bva.difference_with(&bvb);
assert_eq!(bva, bva_b);

let bva = BitSet::from_bytes(&[a]);
let mut bvb = BitSet::from_bytes(&[b]);

bvb.difference_with(&bva);
assert_eq!(bvb, bvb_a);

pub fn symmetric_difference_with(&mut self, other: &Self)

Makes this bit vector the symmetric difference with the specified other bit vector in-place.

Examples

use bit_set::BitSet;

let a   = 0b01101000;
let b   = 0b10100000;
let res = 0b11001000;

let mut a = BitSet::from_bytes(&[a]);
let b = BitSet::from_bytes(&[b]);
let res = BitSet::from_bytes(&[res]);

a.symmetric_difference_with(&b);
assert_eq!(a, res);

pub fn len(&self) -> usize

Returns the number of set bits in this set.

pub fn is_empty(&self) -> bool

Returns whether there are no bits set in this set

pub fn clear(&mut self)

Clears all bits in this set

pub fn contains(&self, value: usize) -> bool

Returns true if this set contains the specified integer.

pub fn is_disjoint(&self, other: &Self) -> bool

Returns true if the set has no elements in common with other. This is equivalent to checking for an empty intersection.

pub fn is_subset(&self, other: &Self) -> bool

Returns true if the set is a subset of another.

pub fn is_superset(&self, other: &Self) -> bool

Returns true if the set is a superset of another.

pub fn insert(&mut self, value: usize) -> bool

Adds a value to the set. Returns true if the value was not already present in the set.

pub fn remove(&mut self, value: usize) -> bool

Removes a value from the set. Returns true if the value was present in the set.

Trait Implementations

impl<B: BitBlock> Clone for BitSet<B>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, other: &Self)

Performs copy-assignment from source.

impl<B: BitBlock> Debug for BitSet<B>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<B: BitBlock> Default for BitSet<B>

fn default() -> Self

Returns the “default value” for a type.

impl<B: BitBlock> Extend<usize> for BitSet<B>

fn extend<I: IntoIterator<Item = usize>>(&mut self, iter: I)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl<B: BitBlock> FromIterator<usize> for BitSet<B>

fn from_iter<I: IntoIterator<Item = usize>>(iter: I) -> Self

Creates a value from an iterator.

impl<B: BitBlock> Hash for BitSet<B>

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<'a, B: BitBlock> IntoIterator for &'a BitSet<B>

type Item = usize

The type of the elements being iterated over.

type IntoIter = Iter<'a, B>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Iter<'a, B>

Creates an iterator from a value.

impl<B: BitBlock> Ord for BitSet<B>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl<B: BitBlock> PartialEq for BitSet<B>

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<B: BitBlock> PartialOrd for BitSet<B>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<B: BitBlock> Eq for BitSet<B>

Layout

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 32 bytes