pub trait Stream {
type Item;
// Required method
fn poll_next(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
) -> Poll<Option<Self::Item>>;
// Provided method
fn size_hint(&self) -> (usize, Option<usize>) { ... }
}Expand description
A stream of values produced asynchronously.
If Future<Output = T> is an asynchronous version of T, then Stream<Item = T> is an asynchronous version of Iterator<Item = T>. A stream
represents a sequence of value-producing events that occur asynchronously to
the caller.
The trait is modeled after Future, but allows poll_next to be called
even after a value has been produced, yielding None once the stream has
been fully exhausted.
Required Associated Types§
Required Methods§
Sourcefn poll_next(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
) -> Poll<Option<Self::Item>>
fn poll_next( self: Pin<&mut Self>, cx: &mut Context<'_>, ) -> Poll<Option<Self::Item>>
Attempt to pull out the next value of this stream, registering the
current task for wakeup if the value is not yet available, and returning
None if the stream is exhausted.
§Return value
There are several possible return values, each indicating a distinct stream state:
-
Poll::Pendingmeans that this stream’s next value is not ready yet. Implementations will ensure that the current task will be notified when the next value may be ready. -
Poll::Ready(Some(val))means that the stream has successfully produced a value,val, and may produce further values on subsequentpoll_nextcalls. -
Poll::Ready(None)means that the stream has terminated, andpoll_nextshould not be invoked again.
§Panics
Once a stream has finished (returned Ready(None) from poll_next), calling its
poll_next method again may panic, block forever, or cause other kinds of
problems; the Stream trait places no requirements on the effects of
such a call. However, as the poll_next method is not marked unsafe,
Rust’s usual rules apply: calls must never cause undefined behavior
(memory corruption, incorrect use of unsafe functions, or the like),
regardless of the stream’s state.
If this is difficult to guard against then the fuse adapter can be used
to ensure that poll_next always returns Ready(None) in subsequent
calls.
Provided Methods§
Sourcefn size_hint(&self) -> (usize, Option<usize>)
fn size_hint(&self) -> (usize, Option<usize>)
Returns the bounds on the remaining length of the stream.
Specifically, size_hint() returns a tuple where the first element
is the lower bound, and the second element is the upper bound.
The second half of the tuple that is returned is an Option<usize>.
A None here means that either there is no known upper bound, or the
upper bound is larger than usize.
§Implementation notes
It is not enforced that a stream implementation yields the declared number of elements. A buggy stream may yield less than the lower bound or more than the upper bound of elements.
size_hint() is primarily intended to be used for optimizations such as
reserving space for the elements of the stream, but must not be
trusted to e.g., omit bounds checks in unsafe code. An incorrect
implementation of size_hint() should not lead to memory safety
violations.
That said, the implementation should provide a correct estimation, because otherwise it would be a violation of the trait’s protocol.
The default implementation returns (0, None) which is correct for any
stream.
Implementations on Foreign Types§
Source§impl<S> Stream for AssertUnwindSafe<S>where
S: Stream,
impl<S> Stream for AssertUnwindSafe<S>where
S: Stream,
Implementors§
Source§impl<F> Stream for FlattenStream<F>
impl<F> Stream for FlattenStream<F>
Source§impl<F> Stream for futures::future::IntoStream<F>
impl<F> Stream for futures::future::IntoStream<F>
Source§impl<Fut> Stream for TryFlattenStream<Fut>
impl<Fut> Stream for TryFlattenStream<Fut>
Source§impl<Fut> Stream for FuturesOrdered<Fut>where
Fut: Future,
impl<Fut> Stream for FuturesOrdered<Fut>where
Fut: Future,
Source§impl<Fut> Stream for FuturesUnordered<Fut>where
Fut: Future,
impl<Fut> Stream for FuturesUnordered<Fut>where
Fut: Future,
Source§impl<Fut, Si> Stream for FlattenSink<Fut, Si>where
TryFlatten<Fut, Si>: Stream,
impl<Fut, Si> Stream for FlattenSink<Fut, Si>where
TryFlatten<Fut, Si>: Stream,
Source§impl<S, Item, E> Stream for SinkErrInto<S, Item, E>
impl<S, Item, E> Stream for SinkErrInto<S, Item, E>
Source§impl<S, Item, U, St, F> Stream for WithFlatMap<S, Item, U, St, F>
impl<S, Item, U, St, F> Stream for WithFlatMap<S, Item, U, St, F>
Source§impl<St1, St2, Clos, State> Stream for SelectWithStrategy<St1, St2, Clos, State>
impl<St1, St2, Clos, State> Stream for SelectWithStrategy<St1, St2, Clos, State>
Source§impl<St> Stream for BufferUnordered<St>
impl<St> Stream for BufferUnordered<St>
Source§impl<St> Stream for CatchUnwind<St>where
St: Stream + UnwindSafe,
impl<St> Stream for CatchUnwind<St>where
St: Stream + UnwindSafe,
Source§impl<St> Stream for futures::stream::IntoStream<St>where
St: TryStream,
impl<St> Stream for futures::stream::IntoStream<St>where
St: TryStream,
Source§impl<St> Stream for ReadyChunks<St>where
St: Stream,
impl<St> Stream for ReadyChunks<St>where
St: Stream,
Source§impl<St> Stream for TryBufferUnordered<St>
impl<St> Stream for TryBufferUnordered<St>
Source§impl<St> Stream for TryBuffered<St>
impl<St> Stream for TryBuffered<St>
Source§impl<St> Stream for TryFlatten<St>
impl<St> Stream for TryFlatten<St>
Source§impl<St> Stream for TryFlattenUnordered<St>
impl<St> Stream for TryFlattenUnordered<St>
Source§impl<St> Stream for TryReadyChunks<St>where
St: TryStream,
impl<St> Stream for TryReadyChunks<St>where
St: TryStream,
Source§impl<St, F> Stream for InspectErr<St, F>
impl<St, F> Stream for InspectErr<St, F>
Source§impl<St, Fut, F> Stream for TrySkipWhile<St, Fut, F>
impl<St, Fut, F> Stream for TrySkipWhile<St, Fut, F>
Source§impl<St, Fut, F> Stream for TryTakeWhile<St, Fut, F>
impl<St, Fut, F> Stream for TryTakeWhile<St, Fut, F>
Source§impl<St, Fut, F, T> Stream for TryFilterMap<St, Fut, F>
impl<St, Fut, F, T> Stream for TryFilterMap<St, Fut, F>
Source§impl<St, U, F> Stream for FlatMapUnordered<St, U, F>
impl<St, U, F> Stream for FlatMapUnordered<St, U, F>
Source§impl<T, F> Stream for futures::future::PollImmediate<F>where
F: Future<Output = T>,
impl<T, F> Stream for futures::future::PollImmediate<F>where
F: Future<Output = T>,
A Stream implementation that can be polled repeatedly until the future is done. The stream will never return Poll::Pending so polling it in a tight loop is worse than using a blocking synchronous function.
use futures::task::Poll;
use futures::{StreamExt, future, pin_mut};
use future::FusedFuture;
let f = async { 1_u32 };
pin_mut!(f);
let mut r = future::poll_immediate(f);
assert_eq!(r.next().await, Some(Poll::Ready(1)));
let f = async {futures::pending!(); 42_u8};
pin_mut!(f);
let mut p = future::poll_immediate(f);
assert_eq!(p.next().await, Some(Poll::Pending));
assert!(!p.is_terminated());
assert_eq!(p.next().await, Some(Poll::Ready(42)));
assert!(p.is_terminated());
assert_eq!(p.next().await, None);